Camera Calibration Conversion

## Camera Calibration Conversion

If two cameras have a relationship with the same robot arm, this module obtains the calibration of another camera and the robot arm by inputting the calibration of one camera and the robot arm and the mapping between the two cameras.

## Usage Scenarios
Usually applied in situations where some cameras are inconvenient to calibrate.

## Usage Method
Select calibration and mapping, and directly convert the calibration to another plane through mapping. Output as newly generated calibration.

![](/media/202603/2026-03-13_112752_0999630.4349916700282488.png)

## Parameter Configuration Description
【Calibration Group】 The coordinate system group where the calibration data is located.
【Calibration File】 The file storing calibration data.
【Mapping Group】 The coordinate system group where the mapping data is located.
【Mapping File】 The mapping file storing mapping data.
【Reference Image】 The image used as a reference during processing.

---

Click here to jump to the corresponding Chinese manual page: [Camera Calibration Conversion](/doc/135)