Method to Enable Virtual Memory

## Method to Enable Virtual Memory

1. Open Computer Properties, click Advanced System Settings

![1723788378004](/media/202601//1769684089.7378216.png)

![1723788502677](/media/202601//1769684090.1270063.png)

1. Select the Advanced tab

![1723788573752](/media/202601//1769684090.3421397.png)

1. Click the Settings button under Performance

![1723788758384](/media/202601//1769684090.542431.png)

1. Enter the Advanced interface, click Change under Virtual Memory

![1723788887807](/media/202601//1769684090.7426164.png)

1. Click Custom in the Virtual Memory settings interface

![1723788996471](/media/202601//1769684090.9828455.png)

Note:

1. The initial size is recommended to be set to 1 time the physical memory, and the maximum size is recommended to be set to 1.5 times the physical memory, not exceeding 3 times at most.
2. If the C drive space is large enough, virtual memory can be set on the C drive. If the space is insufficient, it can be adjusted to the D drive or other drives.

---

Click here to jump to the corresponding Chinese manual page: [Method to Enable Virtual Memory](/doc/318)