BOOL Setting Widget

## BOOL Setting Widget

### Definition
Mainly used to display or control some BOOL value parameters or switches, such as opening and closing the soft keyboard, opening or closing the mask. Display hardware device status, such as camera connection status, whether connected or disconnected, etc.

### Attributes
Basic information, coordinate size, minimum width and height, maximum width and height, and permissions are consistent with the image widget. Please verify the relevant introduction of [Image Widget](/doc/621).

### Data Configuration - Data Connection
Provide data sources with BOOL data type in flow modules and global variables.

![](/media/202603//1772529899.9367433.png)

### Events
For the BOOL setting widget, Zhunyi designed three events: Open, Close, and Change. Open triggers if the final data result of the BOOL setting is true; Close triggers if the final data result of the BOOL setting is false. Change triggers whether the final result of the BOOL setting is true or false. For example: When the BOOL setting widget is opened, it triggers the start of the mask; when it is closed, it triggers the start of not opening the mask; when it changes, it triggers the modification of the value of the global variable var_1.

![](/media/202603//1772529900.1912034.png)

### Appearance
By adjusting the appearance parameters, you can adjust from the system initial appearance to any appearance desired by the customer.

![](/media/202603//1772529900.447886.png)

### Font Attributes
Please refer to the font attributes related introduction of [Button Widget](/doc/628).

---

Click here to jump to the corresponding Chinese manual page: [BOOL Setting Widget](/doc/346)